Before proceeding with the below, your IBSS base inside WorksManager needs to be setup with 3rd Party Access enabled.
Using WorksManagers IBSS with Trimble & Non Trimble Devices
Using the example below, DJI drone software is capable of operating with a Trimble IBSS base station using an RTCM correction output.
Note: The mount point name will not automatically populate on Non Trimble devices. The example above displays the mount point, which is formed by combining the WorksManager Short Org and base station name UPGBRIS_RTCM__wm_SCSDEMO.
Note: For further assistance please call 1800 748 324 or email supportgateway@sitechcs.com
Comments
0 comments
Article is closed for comments.