Adding VRS Login Credentials

Before proceeding with the below, insure your controller has a stable internet connection.

1. Inside the Receiver Setup page, connect your device to SiteWorks. Now select the Correction method as "Internet"

2. This will bring you to the below page. Follow the below to enter your VRS details. 

Server Address (A) will be: vrsnow.com.au

Port Number (B) will be: 2101

User name (C): this will be provided to you by your SITECH representative

Server password (D): this will be provided to you by your SITECH representative

3. Once you hit Accept, the next page will prompt you to select a Data stream. Please select the desired stream and tap on Accept (for example: 20_NEAREST_CMR_X). Note. If you unsure on the data stream required, please check with you site Surveyor, selecting the incorrect stream can introduce errors.

4. You will then be sent back to the Receiver Setup page to complete your rover setup. You will now be connected to the VRS Network.

Note: For further assistance please call 1800 748 324 or email supportgateway@sitechcs.com